Retrans-Time - Dell C9000 Series Reference Manual

retrans-time

Enable the verification of the configured retransmission timer value in the received RA packets.
C9000 Series
Syntax
retrans—timer value
To reset the advertised retransmission interval, use the no retrans-timervalue
command.
Parameters
value
Defaults none
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.7(0.0)
9.7(0.0)
Enter the advertised retransmission time interval in milliseconds.
The range is from 100 to 4,294,967,295 milliseconds.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S5000, S6000, and Z9000
switches.
Neighbor Discovery Protocol (NDP) 1451