Show Ip Ospf Topology - Dell C9000 Series Reference Manual

Version
9.4(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.8.0
Example
Dell#show ip ospf 10 timers rate-limit
List of LSAs in rate limit Queue
LSA id: 1.1.1.0 Type: 3 Adv Rtid: 3.3.3.3 Expiry time:
00:00:09.111
LSA id: 3.3.3.3 Type: 1 Adv Rtid: 3.3.3.3 Expiry time: 00:00:23.96
Dell#

show ip ospf topology

Display routers in directly connected areas.
C9000 Series
Syntax
show ip ospf [process-id| vrf vrf-name] topology
Parameters
process-id
vrf vrf-name
Defaults none
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Description
Added support for VRF on all platforms (Except MXL and
STOMP).
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first OSPF
process.
Enter the keyword vrf and the name of the VRF to view the
information on routers corresponding to a specific VRF that are
in directly connected areas.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Open Shortest Path First (OSPFv2 and OSPFv3) 1561