Ip Msdp Originator-Id - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

To remove the peer from a mesh group, use the no ip msdp mesh-group {name}

{peer address} command.

peer address

Not configured.

Command Modes

CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Usage Information An MSDP mesh group is a mechanism for reducing SA flooding, typically in an intra-

domain setting. When some subset of a domain's MSDP speakers are fully meshed, they

can be configured into a mesh-group. If member X of a mesh-group receives a SA

message from an MSDP peer that is also a member of the mesh-group, member X

accepts the SA message and forwards it to all of its peers that are not part of the mesh-

group. However, member X cannot forward the SA message to other members of the

ip msdp originator-id

Configure the MSDP Originator ID.

C9000 Series

ip msdp originator-id {interface}

Enter a string of up to 16 characters long for as the mesh group

Enter the peer address in a dotted decimal format (A.B.C.D.).

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Multicast Source Discovery Protocol (MSDP)

Table of Contents