Ipv6 Host - Dell C9000 Series Reference Manual

ipv6 host

Assign a name and IPv6 address for the host-to-IPv6 address mapping table.
C9000 Series
Syntax
ipv6 host name ipv6-address
To remove an IP host, use the no ipv6 host name {ipv6–address}.
Parameters
name
ipv6-address
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.7.0
8.4.2.1
8.4.1.0
Enter a text string to associate with one IP address.
Enter the IPv6 address (X:X:X:X::X) to be mapped to the name.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
IPv6 Basics 1275