Show Config - Dell C9000 Series Reference Manual

Version
8.3.7.0
8.1.1.0
7.6.1.0
Usage Information This feature groups two LAGs to work in tandem as a supergroup. For example, if one
LAG goes down, the other LAG is taken down automatically, providing an alternate path
to reroute traffic, avoiding oversubscription on the other LAG. You can use both static
and dynamic (LACP) LAGs to configure failover groups. For more information, refer to
the "Port Channel" chapter in the Dell Networking OS Configuration Guide.
Related Command
group
show interfaces port-channel
groups.

show config

Display the current configuration of the selected LAG.
C9000 Series
Syntax
show config
Command Modes INTERFACE PORTCHANNEL
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.0
Description
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
— groups two LAGs in a supergroup ("fate-sharing group").
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays information on configured Port Channel
Interfaces 1024