Ipv6 Nd Dns-Server - Dell C9000 Series Reference Manual

ipv6 nd dns-server

Configure Recursive DNS Server (RDNSS) addresses for distribution via IPv6 router advertisements to an IPv6
device.
C9000 Series
Syntax
ipv6 nd dns-server {ipv6-RDNSS-address} {lifetime | infinite}
To remove the IPv6 RDSS configuration, use no ipv6 nd dns-server {ipv6-
RDNSS-address} {lifetime | infinite}
Parameters
ipv6-RDNSS-
address
lifetime
infinite
Defaults Not Configured
Command Modes
INTERFACE
INTERFACE (BATCH MODE)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.5(0.0)
Enter the IPv6 Recursive DNS Server's (RDNSS) address. You can
specify up to 4 IPv6 RDNSS server addresses.
Enter the lifetime in seconds. The amount of time the IPv6 host
can use the IPv6 RDNSS address for name resolution. The range
is 0 to 4294967295 seconds. When you specify the maximum
lifetime value of 4294967295 or infinite, the lifetime does
not expire. A value of 0 indicates to the host that the RDNSS
address should not be used. You must specify a lifetime using
the lifetime or infinite parameter.
Enter the keyword infinite to specify that the RDNSS lifetime
does not expire.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
IPv6 Basics 1278