Iscsi Aging Time - Dell C9000 Series Reference Manual

The following is the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.6(0.0)
Usage Information You can configure iSCSI TLVs to send either globally or on a specified interface. The
interface configuration takes priority over global configuration.

iscsi aging time

Set the aging time for iSCSI sessions.
C9000 Series
Syntax
iscsi aging time time
To remove the iSCSI session aging time, use the no iscsi aging time command.
Parameters
time
Defaults 10 minutes
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.6(0.0)
Description
Introduced on the C9010.
Introduced on the Z9500.
NOTE: The advertise dcbx-app-tlv iscsi command is not supported on
cascade interfaces or extended ports.
Enter the aging time for the iSCSI session. The range is from 5 to
43,200 minutes.
Description
Introduced on the C9010.
Introduced on the Z9500.
iSCSI Optimization 1299