Show Spanning-Tree Pvst - Dell C9000 Series Reference Manual

Version
8.3.7.0
7.6.1.0
7.5.1.0
8.3.1.0
Example
Dell#conf
Dell(conf)#protocol spanning-tree pvst
Dell(conf-pvst)#no disable
Dell(conf-pvst)#vlan 2 bridge-priority 4096
Dell(conf-pvst)#vlan 3 bridge-priority 16384
Dell(conf-pvst)#
Dell(conf-pvst)#show config
!
protocol spanning-tree pvst
Dell#
Usage Information After you enable PVST+, the device runs an STP instance for each VLAN it supports.
Related
disable
Commands

show spanning-tree pvst

show spanning-tree pvst
View the Per-VLAN spanning tree configuration.
C9000 Series
Syntax
show spanning-tree pvst [vlan vlan-id] [brief] [guard]
Parameters
vlan vlan-id
brief
interface interface
Description
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
no disable
vlan 2 bridge-priority 4096
vlan 3 bridge-priority 16384
— disables PVST+.
— displays the PVST+ configuration.
(OPTIONAL) Enter the keyword vlan then the VLAN ID. The
range is 1 to 4094.
(OPTIONAL) Enter the keyword brief to view a synopsis of the
PVST+ configuration information.
(OPTIONAL) Enter one of the interface keywords along with the
slot/port information:
• For a Port Channel interface, enter the keyword port-
channel then a number: The range is 1 to 4096.
Per-VLAN Spanning Tree Plus (PVST+) 1643