Debug Ip Igmp - Dell C9000 Series Reference Manual

debug ip igmp

Enable debugging of IGMP packets.
C9000 Series
Syntax
debug ip igmp [group address | interface]
Parameters
group-address
interface interface
Defaults Disabled.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
E-Series legacy
command
• To disable IGMP debugging, use the no debug ip igmp [group address |
interface] command.
• To disable all debugging, use the undebug all command.
(OPTIONAL) Enter the IP multicast group address in dotted
decimal format.
Enter the following keywords and slot/port or number
information:
•
•
Description
Introduced on the C9010.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a port channel interface, enter the keywords port-
channel then a number.
Internet Group Management Protocol (IGMP) 1126