Bandwidth-Percentage - Dell C9000 Series Reference Manual

bandwidth-percentage

Assign a percentage of weight to the class/queue.
C9000 Series
Syntax
bandwidth-percentage percentage
To remove the bandwidth percentage, use the no bandwidth-percentage
command.
Parameters
percentage
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-out)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.1.9.0
8.3.11.1
8.3.7.0
6.2.1.1
Usage Information The unit of bandwidth percentage is 1%. If the sum of the bandwidth percentages given
to all eight classes exceeds 100%, the bandwidth percentage automatically scales down
to 100%.
Related qos-policy-output
Commands
Enter the percentage assignment of weight to the class/queue.
The range is from 1 to 100% (granularity 1%).
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
— creates a QoS output policy.
Quality of Service (QoS) 1799