Upgrade Poe-Controller; Show Power Inline - Dell C9000 Series Reference Manual

upgrade poe-controller

Manually upgrade the PoE controller firmware for a specified port extender unit.
C9000 Series
Syntax
upgrade poe-controller pe pe-id stack-unit unit number
Parameters
pe pe-id
stack-unit unit
number
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Usage Information The upgrade poe-controller pe command is used to manually upgrade the PoE
controller firmware for a specified port extender unit.
You can upgrade the PoE controller firmware using the firmware image that is packed
with the Dell Networking OS. Once the upgrade is successful, the Port Extender reloads
automatically.
Example
Dell#upgrade poe-controller pe 254 stack-unit 1

show power inline

Display the PoE power allocation on a specified port extender.
C9000 Series
Syntax
show power inline {pe pe-id stack-unit unit number | interface
interface }
Enter the keyword pe and port extender ID. Range is from 0 to
255.
Enter the keyword stack-unit and the unit number. Range is
from 0 to 7.
Description
Introduced on the C9010.
Port Extenders (PE) 1758