Field
Example
Dell#sh fefd
FEFD is globally 'ON', interval is 10 seconds, mode is
'Aggressive'.
INTERFACE MODE
Te 1/0
Te 1/1
Te 1/2
Te 1/3
Te 1/4
Te 1/5
Te 1/6
Te 1/7
Te 1/8
Te 1/9
Te 1/10
Te 1/11
Dell#
Related
•
Commands
•
•
•
Description
•
bi-directional (interface is up, connected and hearing
neighbor's echoes).
•
err-disabled (only found when FEFD mode is aggressive
and when the interface has not hearing its neighbor's
echoes for three times the message interval. To reset an
interface in this state, use the fefd reset command.)
•
unknown (only found when FEFD mode is normal.
•
locally disabled (interface contains the fefd reset
command in its configuration).
•
Admin Shutdown (interface is disabled with the shutdown
command).
INTERVAL
(second)
Aggressive
10
Aggressive
10
Aggressive
10
Aggressive
10
Aggressive
10
Aggressive
10
Aggressive
10
Aggressive
10
Aggressive
10
Aggressive
10
NA
NA
Aggressive
10
fefd
— enables far-end failure detection.
fefd disable
— disables FEFD on an interface only.
fefd-global
— enables FEFD globally on the system.
fefd reset
— resets all interfaces or a single interface that was in "error-disabled"
mode.
STATE
Admin Shutdown
Admin Shutdown
Admin Shutdown
Admin Shutdown
Admin Shutdown
Admin Shutdown
Admin Shutdown
Admin Shutdown
Admin Shutdown
Admin Shutdown
Locally disabled
Err-disabled
Layer 2
1348