Threshold Metric - Dell C9000 Series Reference Manual

Track 3
Example (Brief)
Dell>show track brief
ResId Resource
1
2
3
Related
Commands

threshold metric

Configure the metric threshold used to determine the UP and/or DOWN state of a tracked IPv4 or IPv6 route.
C9000 Series
Syntax
threshold metric {up number | down number}
To return to the default setting, use the no threshold metric {up number |
down number} command.
Parameters
up number
down number
VRRP TenGigabitEthernet 2/3/4 IPv6 VRID 1
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:16
First-hop interface is TenGigabitEthernet 1/2/1
Tracked by:
VRRP TenGigabitEthernet 2/3/4 IPv6 VRID 1
IP route reachability
Interface line-protocol Ethernet0/2
Interface ip routing
• show running-config track
objects.
• track interface ip routing
IPv4 Layer 3 interface.
• track interface line-protocol
state of a Layer 2 interface.
• track ip route metric threshold
IPv4 route metric.
• track ip route reachability
IPv4 route.
•
Enter a number for the UP threshold to be applied to the scaled
metric of an IPv4 or IPv6 route. The default UP threshold is 254.
The routing state is UP if the scaled route metric is less than or
equal to the UP threshold.
Enter a number for the DOWN threshold to be applied to the
scaled metric of an IPv4 or IPv6 route. The default DOWN
threshold is 255. The routing state is DOWN if the scaled route
metric is greater than or equal to the DOWN threshold.
Parameter
10.16.0.0/16 Up
VLAN100
– displays configuration information about tracked
– configures object tracking on the routing status of an
– configures object tracking on the line-protocol
– configures object tracking on the threshold of an
– configures object tracking on the reachability of an
State LastChange
00:01:08
Down 00:05:00
Up 01:10:05
Object Tracking 1464