Dell C9000 Series Reference Manual page 1321

Parameters
linecard slot-id
port-set port-pipe
address mac-addr
dynamic
interface interface
static
vlan vlan-id
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.5.1.0
8.3.7.0
7.5.1.0
(REQUIRED) Enter the keyword linecard then a slot number to
select the linecard for which to gather information. The range of
C9000 slot IDs are from 0 to 11.
(REQUIRED) Enter the keywords port-set then a port-pipe
number to specify the port pipe for which to gather information.
The range of port pipe numbers is from 0 to 0.
(OPTIONAL) Enter the keyword address then a MAC address in
the nn:nn:nn:nn:nn:nn format to display information on that
MAC address.
(OPTIONAL) Enter the keyword dynamic to display only those
MAC addresses the switch dynamically learns.
(OPTIONAL) Enter the keyword interface then the interface
type, slot and port information:
• For a Port Channel interface, enter the keywords port-
channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
(OPTIONAL) Enter the keyword static to display only those
MAC addresses specifically configured on the switch.
(OPTIONAL) Enter the keyword vlan then the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1 to
4094.
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the C-Series.
Layer 2 1321