Show Iscsi Session Detailed - Dell C9000 Series Reference Manual

In a VLT configuration, show iscsi session output is not accurate unless there are
iSCSI traffic flows on VLT LAGs on both the target and the initiator side of the VLT
domain.
Related
Commands

show iscsi session detailed

Display detailed information on active iSCSI sessions on the switch.
C9000 Series
Syntax
show iscsi session detailed [session isid]
Parameters
isid
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.6(0.0)
Example
Dell# show isci session detailed
Session 0 :
---------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-2c
Up Time:00:00:01:28(DD:HH:MM:SS)
Time for aging out:00:00:09:34(DD:HH:MM:SS)
ISID:806978696102
Initiator
IP Address TCP Port
10.10.0.44 33345
• show iscsi — displays the currently configured iSCSI settings.
• show iscsi session detailed— displays detailed information about active iSCSI
sessions on the switch.
• show run iscsi— shows run iscsi.
Enter the session's iSCSi ID to display detailed information about
the specified iSCSi session.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Initiator Target Target
IP Address TCPPort ID
10.10.0.101 3260
Connection
0
iSCSI Optimization 1306