Distribute-List In - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

Usage Information To specify a distance for routes learned from other routing domains, use the

redistribute command.

distribute-list in

Apply a filter to incoming routing updates from OSPF to the routing table.

C9000 Series

distribute-list prefix-list-name in [interface]

To delete a filter, use the no distribute-list prefix-list-name in

[interface] command.

prefix-list-name

Not configured.

Command Modes

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Introduced on the C-Series.

Introduced on the E-Series.

Enter the name of a configured prefix list.

(OPTIONAL) Enter one of the following keywords and slot/port

or number information:

For Port Channel groups, enter the keywords port-

channel then a number. The range is from 1 to 128.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a VLAN, enter the keyword vlan then a number from 1

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S4820T.

Open Shortest Path First (OSPFv2 and OSPFv3)

Table of Contents