Cam-Acl - Dell C9000 Series Reference Manual

• show ipv6 accounting access-list
• show running-config

cam-acl

Allocate content addressable memory (CAM) for IPv4 and IPv6 ACLs.
C9000 Series
Syntax
cam-acl {default | l2acl number{ ipv4acl number ipv6acl number
ipv4qos number l2qos number l2pt number ipmacacl number vman-qos |
vman-dual-qos number ecfmacl number [ openflow number fcoeacl
number | fedgovacl number| nlbclusteracl number | ipv4pbr number |
iscsioptaclnumber | openflow number | vrfv4ac numberl ]}}
Parameters
default
l2acl number
Use the default CAM profile settings and set the CAM as follows:
• L3 ACL (ipv4acl): 4
• L2 ACL(l2acl): 5
• IPv6 L3 ACL (ipv6acl): 0
• L3 QoS (ipv4qos): 2
• L2 QoS (l2qos): 1
• OpenFlow: 0 (disabled)
• FCoE (fcoeacl): 0 (disabled)
• iSCSI Optimization (iscsioptacl): 0 (disabled)
• L2 PT : 0
• IP-MAC ACL : 0
• Vman QoS : 0
• ECFM ACL: 0
• IPv4 PBR : 0
• VRFv4 ACL : 0
• FedGov ACL : 0
• NLB Cluster ACL : 0
Allocate space to each CAM region.
Enter the CAM profile name then the amount for CAM space
allocation. The total space allocated must be equal to 12. The
IPv6 ACL range must be a factor of 2.
IPv6 Access Control Lists (IPv6 ACLs) 1239