address resolution protocol (ARP) cache. A tracked route is considered to be reachable
if there is an ARP cache entry for the route's next-hop address.
If the next-hop address in the ARP cache ages out for a route tracked for its
reachability, an attempt is made to regenerate the ARP cache entry if the next-hop
address appears before considering the route DOWN.
Related
Commands
track resolution ip route
Configure the protocol-specific resolution value used to scale an IPv4 route metric.
C9000 Series
Syntax
track resolution ip route {isis resolution-value | ospf
resolution-value}
To return to the default setting, use the no track object-id command.
Parameters
object-id
isis resolution-
value
ospf resolution-
value
Defaults
none
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
8.3.12.0
•
show track
– displays information about tracked objects, including configuration,
current state, and clients which track the object.
•
track ip route metric threshold
IPv4 route metric.
Enter the ID number of the tracked object. The range is from 1
to 500.
Enter the resolution used to convert the metric in the routing
table for ISIS routes to a scaled metric.
Enter the resolution used to convert the metric in the routing
table for OSPF routes to a scaled metric.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
Introduced on the S4810.
– configures object tracking on the threshold of an
Object Tracking
1471