Isis Password - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1

isis password

Configure an authentication password for an interface.
C9000 Series
Syntax
isis password [hmac-md5] password [level-1 | level-2]
To delete a password, use the no isis password [password] [level-1 |
level-2] command.
Parameters
encryption-type
hmac-md5
password
level-1
level-2
Defaults No default password. level-1 (if not otherwise specified).
Command Modes INTERFACE
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
(OPTIONAL) Enter 7 to encrypt the password using DES.
(OPTIONAL) Enter the keywords hmac-md5 to encrypt the
password using MD5.
Assign the interface authentication password.
(OPTIONAL) Independently configures the authentication
password for Level 1. The router acts as a station router for Level
1 routing. This setting is the default.
(OPTIONAL) Independently configures the authentication
password for Level 2. The router acts as an area router for Level
2 routing.
Intermediate System to Intermediate System (IS-IS) 1083