Max-Age - Dell C9000 Series Reference Manual

max-age

To maintain configuration information before refreshing that information, set the time interval for the MSTB.
C9000 Series
Syntax
max-age seconds
To return to the default values, use the no max-age command.
Parameters
max-age
Defaults 20 seconds
Command Modes MULTIPLE SPANNING TREE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.5.1.0
Related
forward-delay
Commands
Learning State before transitioning to the Forwarding State.
hello-time
Enter a number of seconds the system waits before refreshing
configuration information. The range is from 6 to 40. The
default is 20 seconds.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— the amount of time the interface waits in the Blocking State and the
— changes the time interval between BPDUs.
Multiple Spanning Tree Protocol (MSTP) 1425