Show Isis Interface - Dell C9000 Series Reference Manual

show isis interface

Display detailed IS-IS interface status and configuration information.
C9000 Series
Syntax
show isis interface [interface][vrf vrf-name]
Parameters
interface
vrf vrf-name
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.5(0.1)
(OPTIONAL) Enter the following keywords and slot/port or
number information:
•
•
•
•
•
•
(OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to display IS-IS interface status information corresponding
to that VRF.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
For a port channel interface, enter the keywords port-
channel then a number.
For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Intermediate System to Intermediate System (IS-IS) 1113