Show Control-Bridge Status - Dell C9000 Series Reference Manual

show control-bridge status

Display the status of the control bridge from the port extender (PE) console.
C9000 Series
Syntax
show control-bridge status
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command-Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Example
Dell#show control-bridge status
Reason: CNU - CSP Not Up, IPE - IPC Program Error
PPE - PEM Program Error, CPE - CHM Program Error
UE - UnKnown Error
CB System MAC : 34:17:eb:00:20:00
Csp Sess Status : UP
Active CB : YES
Uplink LAG : Port-channel 257
LAG Admin Status : UP
LAG Oper Status : UP
--------------------------------
Status Reason RPM-Id PE-Id
--------------------------------
Online -
Usage Information Use the show control-bridge status command output information to debug the
connectivity issues between the control bridge and port extender.
• EXEC
• EXEC Privilege
Description
Introduced on the C1048P.
0 255
PE Console Commands 1618