Debug Ipv6 Ospf Bfd - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

debug ipv6 ospf bfd

Display debug information and interface types for bidirectional forwarding detection (BFD) on OSPF IPv6

C9000 Series

[no] debug ipv6 ospf bfd [interface]

Command Modes

EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Usage Information The following section describes the command fields.

(OPTIONAL) Enter one of the following keywords and slot/port

or number information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

For a tunnel interface, enter the keyword tunnel then a

number. The range is from 1 to 16383.

For a VLAN, enter the keyword vlan then a number from 1

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S4820T, S4810, and Z9000.

Debugging is on for all OSPFv3 packets and all interfaces.

Displays the time stamp.

Open Shortest Path First (OSPFv2 and OSPFv3)

Table of Contents