Delay - Dell C9000 Series Reference Manual

notifications
object-id
Defaults Enable debugging on the state and notifications of all tracked objects (debug track
all).
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
8.3.12.0
8.4.1.0
Example
Dell#debug track all
04:35:04: %RPM0-P:RP2 %OTM-5-STATE: track 6 - Interface
TenGigabitEthernet 1/2/1
line-protocol DOWN
04:35:04: %RPM0-P:RP2 %OTM-5-NOTIF: VRRP notification: resource
ID 6 DOWN

delay

Configure the time delay used before communicating a change in the status of a tracked object to clients.
C9000 Series
Syntax
delay {[up seconds] [down seconds]}
To return to the default setting, use the no delay command.
Parameters
seconds
Enables debugging on the notifications of all tracked objects.
Enables debugging on the state and notifications of the
specified tracked object. The range is from 1 to 500.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
Introduced on the S4810.
Introduced.
Enter the number of seconds the object tracker waits before
sending a notification about the change in the UP and/or DOWN
Object Tracking 1458