Show Ip Management-Eis-Route - Dell C9000 Series Reference Manual

Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.2(0.0)

show ip management-eis-route

Display the management routes used by EIS.
C9000 Series
Syntax
show ip management-eis-route
Defaults None.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.2.(0.0)
Example
Dell# show ip management-eis-route
Destination
-----------
10.11.0.0/16
172.16.1.0/24
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
Gateway
-------
ManagementEthernet 0/0
10.11.192.4
State Route Source
----- ------------
Connected Connected
Active Static
Interfaces 1015