Show Mac-Address-Table Aging-Time - Dell C9000 Series Reference Manual

Line Beginning
With
MAC Entries...
Dynamic
Address...
Static Address...
Total MAC...
Example (Count)
Dell# show mac-address-table count
MAC Entries for all vlans :
Dynamic Address Count :
Static Address (User-defined) Count : 0
Sticky Address Count :
Total Synced Mac from Peer(N):
Total MAC Addresses in Use:
Dell#
Related

show mac-address-table aging-time

Commands
show mac-address-table aging-time
Display the aging times assigned to the MAC addresses on the switch.
C9000 Series
Syntax
show mac-address-table aging-time [vlan vlan-id]
Parameters
vlan vlan-id
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
Description
Displays the number of MAC entries learned per VLAN.
Lists the number of dynamically learned MAC addresses.
Lists the number of user-defined MAC addresses.
Lists the total number of MAC addresses the switch uses.
(OPTIONAL) Enter the keyword vlan then the VLAN ID to
display the MAC address assigned to the VLAN. The range is
from 1 to 4094.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
110
0
100
110
— displays MAC aging time.
Layer 2 1325