Show Ip Redirect-List - Dell C9000 Series Reference Manual

Version
9.4(0.0)
Usage Information The show cam pbr command displays the PBR CAM content.
Related
Commands

show ip redirect-list

View the redirect list configuration and the interfaces it is applied to.
C9000 Series
Syntax
show ip redirect-list redirect-list-name
Parameters
redirect-list-name
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.5(0.1)
9.4(0.0)
Example
Dell#sh ip redirect-list
IP redirect-list test1:
Defined as:
hop reachable (via Te 0/7)
Applied interfaces:
Description
Introduced on the S4810, S4820T, S6000, and Z9000.
• ip redirect-group – applies a redirect group to an interface.
• show ip redirect-list
Enter the name of a configured Redirect list.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048–ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S4810, S4820T, S6000, and Z9000.
seq 5 redirect tunnel 1 track 1 ip any any, Track 1 [up], Next-
– displays the redirect-list configuration.
Policy-based Routing (PBR) 1710