Show Ip Ospf Database Router - Dell C9000 Series Reference Manual

Version
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Related show ip ospf database
Commands

show ip ospf database router

Display the router (type 1) LSA information.
C9000 Series
Syntax
show ip ospf [process-id| vrf vrf-name]database router [link-
state-id] [adv-router ip-address]
Parameters
process-id
vrf vrf-name
link-state-id
adv-router ip-
address
Command Modes
Description
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays OSPF database information.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first OSPF
process.
Enter the keyword vrf and the name of the VRF to view the
router LSA information corresponding to the OSPF process that
is tied to a specific VRF.
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID
value depends on the LSA type, and it can be one of the
following:
•
•
•
(OPTIONAL) Enter the keywords adv-router followed by the IP
address of an Advertising Router to display only the LSA
information about that router.
• EXEC
• EXEC Privilege
the network's IP address for Type 3 LSAs or Type 5 LSAs
the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs
the default destination (0.0.0.0) for Type 5 LSAs
Open Shortest Path First (OSPFv2 and OSPFv3) 1545