Ip Ospf Message-Digest-Key - Dell C9000 Series Reference Manual

Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage Information The time interval between the hello packets must be the same for routers in a network.
Related ip ospf dead-interval
Commands

ip ospf message-digest-key

Enable OSPF MD5 authentication and send an OSPF message digest key on the interface.
C9000 Series
Syntax
ip ospf message-digest-key keyid md5 key
To delete a key, use the no ip ospf message-digest-key keyid command.
Parameters
keyid
key
Defaults No MD5 authentication is configured.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— sets the time interval before a router is declared dead.
Enter a number as the key ID. The range is from 1 to 255.
Enter a continuous character string as the password.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Open Shortest Path First (OSPFv2 and OSPFv3) 1509