Show Ip Pim Interface - Dell C9000 Series Reference Manual

Version
9.5(0.1)
8.3.19.0
8.3.12.0
8.4.1.1
Usage Information The following describes the show ip pim snooping neighbor commands shown
in the following example.
Field
Neighbor address
Interface
Uptime/expires
Ver
DR prio/Mode
Example
Dell#show ip pim snooping neighbor
Neighbor
Address
165.87.32.2
165.87.32.10
165.87.32.12

show ip pim interface

View information on the interfaces with IP PIM enabled.
C9000 Series
Syntax
show ip pim interface
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Description
Displays the IP address of the neighbor learned through PIM-SM
snooping.
Displays the VLAN ID number and slot/port on which the PIM-
SM-enabled neighbor was discovered.
Displays the amount of time the neighbor has been up then the
amount of time until the neighbor is removed from the multicast
routing table (that is, until the neighbor hold time expires).
Displays the PIM version number:
• v2 = PIM version 2
Displays the Designated Router priority and the mode:
• 1 = default Designated Router priority (use the ip pim
dr-priority command)
• DR = Designated Router
• S = Sparse mode
Interface
Vl 2 [Te 1/13 ]
Vl 2 [Te 1/11 ]
Vl 2 [Te 41/20 ] 00:00:51/00:01:24
Uptime/Expires
00:04:03/00:01:42
00:00:46/00:01:29
PIM-Sparse Mode (PIM-SM)
Ver DR Prio
v2 1
v2 0
v2 0
1689