Graceful-Restart T1 - Dell C9000 Series Reference Manual

graceful-restart t1

Set the graceful restart wait time before unacknowledged restart requests are generated. This wait time is the
interval before the system sends a restart request (an IIH with RR bit set in Restart TLV) until the CSNP is
received from the helping router.
C9000 Series
Syntax
graceful-restart t1 {interval seconds | retry-times value}
To return to the default, use the no graceful-restart t1 command.
Parameters
interval
retry-times
Defaults Refer to Parameters.
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.3.1.0
Enter the keyword interval to set the wait time. The range is
from 5 to 120 seconds. The default is 5 seconds.
Enter the keywords retry-times to set the number of times
the request interval is extended until a CSNP is received from the
helping router. The range is from 1 to 10 attempts. The default is
1.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Intermediate System to Intermediate System (IS-IS) 1067