show ip msdp
Display the MSDP peer status, SA cache, or peer summary.
C9000 Series
Syntax
show ip msdp {peer peer address | sa-cache | summary}
Parameters
peer peer address
sa-cache
summary
Defaults
Not configured.
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
8.3.19.0
8.3.11.1
8.3.7.0
6.2.1.1
Example
Dell#show ip msdp peer 100.1.1.1
Peer Addr: 100.1.1.1
Enter the keyword peer then the peer address in a dotted
decimal format (A.B.C.D.).
Enter the keywords sa-cache to display the Source-Active
cache.
Enter the keyword summary to display an MSDP peer summary.
•
EXEC
•
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced
Local Addr: 100.1.1.2(639) Connect Source: none
State: Established Up/Down Time: 00:00:08
Timers: KeepAlive 60 sec, Hold time 75 sec
SourceActive packet count (in/out): 0/0
SAs learned from this peer: 0
SA Filtering:
Multicast Source Discovery Protocol (MSDP)
1417