Configure The Lldp-Med Port Settings - NETGEAR GS108Tv3 User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
The page refreshes and displays the data transmitted in the network policy TLVs for the
interface.
The following table describes the LLDP-MED network policy information that displays on the
page.
Table 24. LLDP-MED network policy information
Field
Network Policy Number
Application
VLAN ID
VLAN Type
User Priority
DSCP

Configure the LLDP-MED port settings

You can enable the LLDP-MED mode on a port and configure its properties.
To configure the LLDP-MED settings for a port:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network on page 30.
The login page displays.
If the NETGEAR Business page displays, see Register and access the switch with your
NETGEAR account on page 34.
Configure System Information
Cloud Management
Description
The policy number.
The media application type associated with the policy, which can be one of the
following:
• Unknown
• Voice
• Guest Voice
• Guest Voice Signaling
• Softphone Voice
• Video Conferencing
• Streaming Video
• Video Signaling
A port can receive multiple application types. The application information is
displayed only if a network policy TLV was transmitted from the port.
The VLAN ID associated with the policy.
Indicates whether the VLAN associated with the policy is tagged or untagged.
The priority associated with the policy.
The DSCP associated with a particular policy type.
115 User Manual