Configure Cos Interface Settings For An Interface - NETGEAR XS708T User Manual
8-port, 12-port, and 16-port
10-gigabit smart managed pro switch
Hide thumbs
Also See for XS708T:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- Installation (2 pages)
Table of Contents
Advertisement
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
Configure CoS Interface Settings for an Interface
Use the CoS Interface Configuration page to configure the trust mode for one or more
interfaces and to apply an interface shaping rate to all interfaces or to a specific interface.
To configure CoS settings for an interface:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch
on page 10.
The login window opens.
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select QoS > CoS > Advanced > CoS Interface Configuration.
6.
Select LAG to display all LAG interfaces or select All to display both all physical and all LAG
interfaces.
7.
Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the port, or type
the port number in the Go To Interface field and click the Go button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the heading
row.
Configure Quality of Service
236
Change the Default IP Address of the
Hide quick links:
Advertisement
Table of Contents
