E.7.5.5.3
WAN | Loopback Test
Use this page to test the operational integrity of the NP Interface M&C, WAN Interface, and IF
Interface.
Loopback Test
Loopback Test Results – This message window displays the results of the completed Loopback
Test.
Packet Loopback Test – When you click [Start Test], the NP Interface sends 50 multicast packets
towards the WAN interface, and enables the IF Loopback. All packets returned from the IP
Loopback will count by the NP Interface, and are displayed in the Packet Loopback Test Results
window.
Appendix E
Figure E-26. WAN | Loopback Test Page
E–46
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A