Do these steps to install the brackets kit (Figure 3-3):
Tools needed to install the optional KT/6228-2 (4") or KT/6228-3 (10")
Brackets Kit:
1. Assemble the #10 Shoulder Screws (Item 1) through the Adapter Plate mounting slots
using the #10 Flat Washers (Item 2), #10 Split Washers (Item 3), and #10 Hex Nuts
(Item 4).
2. Mount the Rear Support Brackets (Item 6) to the rack enclosure threaded rear mounting
rails (Feature 2) using the #10 Rack Bracket Bolts (Item 5).
3. Slide the unit into the front of the rack enclosure. Make sure that the #10 Shoulder
Screws (Item 1) properly engage into the slots of the Rear Support Brackets (Item 6).
Installation
•
A medium Phillips
•
A 5/32-inch SAE Allen
•
An adjustable Crescent
screwdriver
Wrench
wrench.
3–5
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A