Comtech EF Data SLM-5650A Installation And Operation Manual page 450

F.5.1.1 Secure Shell (SSH) User Access
Chapter 8. ETHERNET INTERFACE OPERATION
See Chapter 8. ETHERNET INTERFACE OPERATION, Section 8.4 Secure Shell (SSH)
Interface for initial setup and operational examples for using an SSH terminal emulator
application for CLI operations
As explained in Chapter 8. ETHERNET INTERFACE OPERATION, Section 8.4
SSH (Secure Shell) Interface, this appendix section uses PuTTY (Figure F-9), a
free and open source terminal emulator application used as a serial console
client for SSH, Telnet, rlogin and raw TCP computing protocols. While the
TRANSEC Module CLI main and nested screens will be identical across
terminal emulator applications, setup may differ slightly – this appendix
assumes user familiarity with the preferred SSH interface.
Once connected to the TRANSEC Module via the SSH interface, you will need to provide a login
name and password (the defaults for both are comtech). When the valid login and password are
provided, you are taken directly to the CLI Main Menu, as shown in the Figure F-10 examples.
Appendix F
Figure F-10. PuTTY Examples
F–26
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A