Comtech EF Data SLM-5650A Installation And Operation Manual page 345

E.7.5.2.4 Admin | SNMP
Chapter 8. ETHERNET INTERFACE OPERATION
The Admin user may use this page to change the parameters associated with Simple Network
Management Protocol, an application-layer protocol designed to facilitate the exchange of
management information between network devices. The SLM-5650A SNMP agent supports
SNMPv1, SNMP v2c, and SNMP v3. See Chapter 8. ETHERNET INTERFACE OPERATION,
Sect. 8.4 SNMP Interface, for complete details on SNMP and using this page.
SNMP
The SNMP Read and Write Communities cannot be changed; the default name for Read
Community is public; the default Write Community name is private.
Click [Submit] to enable the SNMP configuration changes made to Trap Community, Trap,
System Contact, and System Location.
Appendix E
Figure E-10. Admin | SNMP Page
E–23
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A