Comtech EF Data SLM-5650A Installation And Operation Manual page 238

Controller-to-Target
Instruction Code and
Qualifier
Parameter
Type
Command Query
Retrieve next 5 N/A RNE?
unread Stored
Events
Serial Remote Control
Arguments
for Command
(Note that all arguments are ASCII numeric codes from 48 to 57)
or Query
110 bytes Query only.
Returns the oldest five Stored Events that have not yet been read
over the remote interface in the form {CR}Sub-body{CR}Sub-
body{CR}Sub-body{CR}Sub-body{CR}Sub-body, where:
Sub-body = Axxxxxxxxddmmyyhhmmss:
A = fault type, where:
1=Unit
2=Rx Traffic
3=Tx Traffic
4=Info
xxxxxxxx = Fault Code number, as in LUF?, TXF?, RXF?, or Info
Code. Specifically:
00000000 = Power Off
00000001 = Power On
00000002 = Log Cleared
00000004 = Global Config Change
00000005 = NP Module Watch Dog Timer
00000006 = NP Module Boot Timeout
00000007 = TRANSEC Module Boot Timeout
ddmmyyhh = date in day/month/year format
hhmmss = time in hours/minutes/seconds format
Note: If there are less than 5 events to be retrieved, the remaining
positions are padded with zeros. If there are no new events, the
response is RNE*.
Description of Arguments
10–44
SLM-5650A Satellite Modem
Revision 10
Target-to-Controller
Response to Query
Response to
(see Description of
Command
Arguments)
N/A RNE={CR}Axxxxxxxxd
dmmyyhhmmss{CR}A
xxxxxxxxddmmyyhhm
mss{CR}Axxxxxxxxdd
mmyyhhmmss{CR}Ax
xxxxxxxddmmyyhhmm
ss{CR}Axxxxxxxxddm
myyhhmmss
MN-SLM-5650A