Comtech EF Data SLM-5650A Installation And Operation Manual page 232

Controller-to-Target
Instruction Code and
Qualifier
Parameter
Type
Command Query
Equipment ID
(cont)
Serial Remote Control
Arguments
for Command
(Note that all arguments are ASCII numeric codes from 48 to 57)
or Query
e = Data Rate (Asymmetric Tx) Option where:
0=Base (5,000 kbps)
1=10,000 kbps
2=20,000 kbps
3=51,840 kbps
4=155,520 kbps
5=2,500 kbps
f = Higher-order modulation where:
0=None
1=8PSK
2=8PSK and 16QAM
3=8PSK+16QAM and 16APSK/32APSK
g = Reed-Solomon Codec Option where:
0=None
1=Installed
h = TRANSEC Module where:
0=None
1=FEC2 Card and TRANSEC Module Installed
2=FEC2 Card Installed (No TRANSEC)
i = AUPC Option where:
0=None
1=Installed
j = ASYNC Engineering Service Channel where:
0=None
1=Installed
k = Demod Only
Description of Arguments
10–38
SLM-5650A Satellite Modem
Revision 10
Target-to-Controller
Response to Query
Response to
(see Description of
Command
Arguments)
MN-SLM-5650A