Comtech EF Data SLM-5650A Installation And Operation Manual page 130

SLM-5650A Satellite Modem
Revision 10
Option Settings
Vipersat mode should not be selected from the front panel under most circumstances. Refer to
the supplementary Vipersat User Guide (CEFD P/N MN-0000035) for detailed information on
configuring the Vipersat features.
When selecting an IF frequency band, both transmit and receive operate in the selected band.
Operation of transmit in one IF frequency band and the receive in the other IF frequency band is
not permitted.
When selecting a data interface type, a native interface can be selected even if an optional
interface is installed, but an optional interface can only be selected if it is installed. Both transmit
and receive must use the selected interface type. Transmitting using one interface type and
receiving using another interface type is not permitted.
Front Panel Operation 7–24 MN-SLM-5650A