Comtech EF Data SLM-5650A Installation And Operation Manual page 228

Controller-to-Target
Instruction Code and
Qualifier
Parameter
Type
Command Query
Configured N/A CFO?
FAST Options
Serial Remote Control
Arguments
for Command
(Note that all arguments are ASCII numeric codes from 48 to 57)
or Query
16 bytes Command or Query.
Sets or returns information concerning the Configured FAST Options
and their option fields, in the form abcdefghijxxxxxxxx, where:
a = QOS where 0=Not Installed, 1=Installed
b = Reserved
c = Spectrum Spreading
d = Management Security where 0=Not Installed, 1=Installed
e = Vipersat Compatibility where 0=Not Installed, 1=Installed
f = Reserved
g = TRANSEC Data Rate Option where:
0=Base (5,000 kbps)
1=10,000 kbps
2=20,000 kbps
3=51,840 kbps
4=155,520 kbps
5=2,500 kbps
h = Vipersat Data Rate Option where:
0=Base (5,000 kbps)
1=10,000 kbps
2=20,000 kbps
3 = 51,840 kbps
4=155,520 kbps,
5=2,500 kbps
i = Bridged Point to Multipoint where:
0=Not Installed
1=Installed
j = Customer Defined Options 0-3
x =spare
Description of Arguments
10–34
SLM-5650A Satellite Modem
Revision 10
Target-to-Controller
Response to Query
Response to
(see Description of
Command
Arguments)
N/A CFO=abcdefghijxxxxx
x
MN-SLM-5650A