Comtech EF Data SLM-5650A Installation And Operation Manual page 248

Controller-to-Target
Instruction Code and
Qualifier
Parameter
Type
Command Query
ASYNC ESC Tx ATB= ATB?
Baud Rate
ASYNC ESC Tx ATF= ATF?
Format
Serial Remote Control
Arguments
for Command
(Note that all arguments are ASCII numeric codes from 48 to 57)
or Query
1 byte Command or Query.
Sets or returns Baud Rate in the form x, where:
0 = 110
1 = 150
2 = 300
3 = 600
4 = 1200
5 = 2400
6 = 4800
7 = 9600
8 = 19200
9 = 38400
Example: <0001/ATB=0{CR} (sets the ASYNC ESC Tx Baud Rate to
110 Baud)
2 bytes Command or Query.
Sets or returns Async Format in the form xx, where:
00 = 7 Bits, No Parity, 1 Stop Bit
01 = 7 Bits, Even Parity, 1 Stop Bit
02 = 7 Bits, Odd Parity, 1 Stop Bit
03 = 7 Bits, No Parity, 2 Stop Bits
04 = 7 Bits, Even Parity, 2 Stop Bits
05 = 7 Bits, Odd Parity, 2 Stop Bits
06 = 8 Bits, No Parity, 1 Stop Bit
07 = 8 Bits, Even Parity, 1 Stop Bit
08 = 8 Bits, Odd Parity, 1 Stop Bit
09 = 8 Bits, No Parity, 2 Stop Bits
10 = 8 Bits, Even Parity, 2 Stop Bits
11 = 8 Bits, Odd Parity, 2 Stop Bits
Example: <0001/ATF=00{CR} (sets the ASYNC ESC Tx Format to
7N1)
Description of Arguments
10–54
SLM-5650A Satellite Modem
Revision 10
Target-to-Controller
Response to Query
Response to
(see Description of
Command
Arguments)
ATB= ATB=x
ATB?
ATB*
ATB#
ATF= ATF=xx
ATF?
ATF*
ATF#
MN-SLM-5650A