Comtech EF Data SLM-5650A Installation And Operation Manual page 205

Controller-to-Target
Instruction Code and
Qualifier
Parameter
Type
Command Query
Interface Type ITF= ITF?
Serial Remote Control
Arguments
for Command
(Note that all arguments are ASCII numeric codes from 48 to 57)
or Query
1 byte Command or Query.
Sets or returns the Interface Type in the form x, where:
0 = EIA-530
1 = HSSI
2 = Unbalance G.703
3 = Balanced G.703
4 = GigaBit Ethernet Interface
6 = Network Processor Card
7 = LVDS Interface
Example: <0001/ITF=0{CR} (sets EIA-530 interface type)
Description of Arguments
10–11
SLM-5650A Satellite Modem
Revision 10
Target-to-Controller
Response to Query
Response to
(see Description of
Command
Arguments)
ITF=x
MN-SLM-5650A