Comtech EF Data SLM-5650A Installation And Operation Manual page 211

Controller-to-Target
Instruction Code and
Qualifier
Parameter
Type
Command Query
DSSS-MA Max TPM= TPM?
Power Limit
Tx Reed- TRD= TRD?
Solomon
Interleaver
Depth
Tx Reed- TRS= TRS?
Solomon
Encoding
Serial Remote Control
Arguments
for Command
(Note that all arguments are ASCII numeric codes from 48 to 57)
or Query
5 bytes Command or Query.
Sets or returns the DSSS-MA Max Output power limit in the form
sxxx.x, where:
s = sign (+/–)
xx.x = Tx Output power level value where the range is from –40.0
to +10.0 dBm.
Example: <0001/TPM=–30.4{CR}
1 byte Command or Query.
Sets or returns the Tx RS encoding, where:
0 = Interleaver Depth 4
1 = Interleaver Depth 8
2 = Interleaver Depth 16
Note: Depending on the active modem mode, overhead type, and
data rate, not all selections will be valid.
Example: <0001/TRD=0{CR} (This is a 'don't care' if RS is Off under
TRS)
1 byte Command or Query.
Sets or returns the Tx RS encoding, where:
0 = Off
1 = On
Note: Depending on the active modem mode, not all selections will
be valid.
Example: <0001/TRS=0{CR} (sets RS encoding as Off)
Description of Arguments
10–17
SLM-5650A Satellite Modem
Revision 10
Target-to-Controller
Response to Query
Response to
(see Description of
Command
Arguments)
TPM= TPM=sxx.x
TPM?
TPM*
TPM#
TRD = TRD =x
TRD?
TRD *
TRD #
TRS= TRS=x
TRS?
TRS*
TRS#
MN-SLM-5650A