Comtech EF Data SLM-5650A Installation And Operation Manual page 97

Depending on the NP Module's security level setting:
8
To update the Network Processor Bulk firmware:
9 Wait while the file transfers.
Firmware Update
Type "http://xxx.xxx.xxx.xxx" for non-secure access (Low Security Mode);
•
Type "https:/xxx.xxx.xxx.xxx" for SSH (Secure Shell) access (High Security Mode). When
•
prompted, enter the User Name and Password to log in:
Factory Default User Name is comtech;
o
Factory Default Password is comtech.
o
a. Open the Admin | Upgrade page:
b. In the Upgrade section of the page, locate the update file downloaded to the User PC
temporary folder:
Click [Browse]. The Choose File dialog box will open.
•
Locate the folder created for the file download; double-click on the folder name to
•
open the folder.
c. Select the update file, and then click [Open]. The filename should appear in the Upgrade
Image File text box.
Click [Upload] to begin the Image Upgrade process.
d.
After [Upload] is clicked, the Image Upgrade page appears while the Network Processor
a.
first transfers, and then uploads, the update file from the PC. Allow sufficient time for the
file to be loaded into the NP Module – uploading will take approximately five minutes.
It is not necessary to wait five minutes before clicking [OK], but you
MUST wait five minutes before rebooting the modem.
5–17
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A