Config Mdm | Spreading (Fast Option); Figure 9-10. Config Mdm | Spreading Page - Comtech EF Data SLM-5650A Installation And Operation Manual

9.3.3.5

Config Mdm | Spreading (FAST Option)

When this FAST Option is enabled, use this page to configure the optional Direct Sequence
Spread Spectrum (DSSS) spectrum spreading and anti-jamming applications.
Click [Submit] to save any changes made on this page.
This page is operational only if the LDPC FEC FAST option is available and
configured, and the Spectrum Spreading or DSSS-MA FAST options are
available. If you attempt to access and operate this page with a non-LDPC
ModCod active, or any non-compatible modem mode active, you will
receive an error message in the affected "Modulator configuration" or
"Demodulator Configuration" page section: for example, "Error: Invalid
FEC" or "Error: Invalid Modem Type".
Base Modem HTTP Interface Operation

Figure 9-10. Config Mdm | Spreading Page

9–14
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A