Comtech EF Data SLM-5650A Installation And Operation Manual page 139

(CONFIG:) Remote  EthernetConfig  SNMP  Communities  Read
SNMP Read Community:
public
To edit the SNMP Read Community string: Use thearrow keys to select a character,
and then use the arrow keys to change that character.
•
Only the first 20 characters on the bottom line are available.
•
All printable ASCII characters are available with the exception of the backslash '/'
(ASCII code 92) and tilde '~' (ASCII code 126).
Once you compose the string, press [ENT]. All trailing spaces are removed from the Read
Community string upon entry.
(CONFIG:) Remote  EthernetConfig  SNMP  Communities  Write
SNMP Write Community:
private
To edit the SNMP Write Community string: Use the  arrow keys to select a character,
and then use the arrow keys to change that character.
•
Only the first 20 characters on the bottom line are available.
•
All printable ASCII characters are available with the exception of the backslash '/'
(ASCII code 92) and tilde '~' (ASCII code 126).
Once you compose the string, press [ENT]. All trailing spaces are removed from the Write
Community string upon entry.
(CONFIG:) Remote  EthernetConfig  SNMP  Traps
SNMP Traps: Address #1
Port Community
Use the arrow keys to select Address #1, Address #2, Port, Community, or Version.
Press [ENT].
Front Panel Operation
(E)
(E)
Address#2
Version (E)
7–33
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A