Comtech EF Data SLM-5650A Installation And Operation Manual page 256

Controller-to-Target
Instruction Code and
Qualifier
Parameter
Type
Command Query
Modem IP MIS= MIS?
Interface
Security Mode
Router IP RIM= RIM?
Address Mode
Router Ethernet RIP= RIP?
Interface Traffic
IP Address and
Subnet Mask
Serial Remote Control
Arguments
for Command
(Note that all arguments are ASCII numeric codes from 48 to 57)
or Query
1 byte Command or Query.
Sets or returns the modem IP Interface security level in the form a,
where:
0 = Normal or Low Level Security, and
1 = High Level Security
Example: <0001/MIS=0{CR}
1 byte Command or Query.
Sets or returns the NP Module's IP Address Mode in the form a,
where:
0 = Single IP Address
1 = Dual IP Address
Example: <0001/RIM=0{CR}
18 bytes Command or Query.
Sets or returns the IP Address and Subnet Mask for the NP Module
Traffic port in the form aaa.bbb.ccc.ddd.ee, where:
aaa.bbb.ccc.ddd = IP Address
ee = Subnet Mask (0-31)
Example: <0001/RIP=010.006.030.001.24{CR}
Description of Arguments
10–62
SLM-5650A Satellite Modem
Revision 10
Target-to-Controller
Response to Query
Response to
(see Description of
Command
Arguments)
MIS= MIS=a
MIS?
MIS*
MIS#
RIM= RIM=a
RIM?
RIM*
RIM#
RIP= RIP=aaa.bbb.ccc.ddd.
ee
RIP?
RIP*
RIP#
MN-SLM-5650A