Comtech EF Data SLM-5650A Installation And Operation Manual page 387

E.7.5.10 Save
To make any Network Processor modifications permanent, you must use this
page to save Unit Configuration before rebooting the unit.
Use this page to save the current unit configurations to Flash memory. This makes all configuration
changes made under the NP HTTP/HTTPS Interface permanent until either a new round of setting
updates is initiated and saved, or all settings are restored to the original factory defaults via the
'Admin | Defaults' page (see Section E.2.5.2.6 for full details).
Click [Save Now] to begin the save process. At the prompt (shown at right), click [OK] to complete
the process, or Cancel to abort the command.
Appendix E
Figure E-37. Save Page
E–65
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A